The Helmet Lock which is also a Jacket Lock and works great as an Accessory lock it is called the Bolt Lock!
The revolutionary motorcycle helmet lock that looks like it belongs on your bike. Optional longer cables make it a wonderful motorcycle jacket lock as well as a motorcycle accessory lock. Simple to install & use. The best looking of all of the helmet locks offered today.
Great for Motorcycles, RV's, Boats, Trailers, Garage Walls, Docks, Golf Bags, Golf carts
or ANYWHERE you can put a lag screw or bolt.
Additional cable lengths and washer attach points for multiple uses for the Bolt
Loc are available.
|
|
See
quick video Broadband
See
quick video Dialup
|
|
Product reviews: |
|
Thunder Press
Product Review
|
Hot Bike
Product Review
|
Backroads
Product Review
|
|
How the Bolt Lock Works
|
 |
1. Take a bolt out anywhere on your bike. Replace it with an equivalent socket head cap screw.
|
 |
Slide it through our washer, use loctite on the threads and secure the washer to the motorcycle. |
 |
Washer to left secured to foot peg bolt.
|
 |
2. Insert the "L" shaped end of the cable through the "D" rings, webbing or face of a helmet, or with the longer cables run it up the sleeve of a jacket or accessories then back through the other end of the cable, then into the slot of either side of the Bolt Lock.
|
 |
2b. When you insert the end into the slot rotate the end 90 deg. so that the end is pointing clockwise. Now turn the key 90 deg. Clockwise which locks the cable to the Bolt Lock. Next slide the Bolt Lock over the flange on our washer as shown to the left. |
 |
3. If you look at the picture to the left, you will notice two keyouts (dark rectangles) in the center of the lock, one pointing to the left, and one pointing up. The one pointing up is the fully locked position which is where you can take the key out of the lock and both cables will be locked and the Bolt Lock itself will be locked to the washer.
If you insert the key in the fully locked position then turn the key clockwise (CW) 90 deg. The slot on the right is open. Another 90 deg. CW opens the Bolt Lock so you can slide it over the washer. Another 80 deg. CW opens the left slot. The final 90 deg. CW you are back to the fully locked position.
Note that the "L" shaped ends in the picture to the left are shown on the outside of the lock to show how the ends should be pointing in the fully locked position. |
 |
The Bolt Lock kit comes with the lock, 2 keys, washer attach points and 12 inch cable loop.
The kit comes in clamshell packaging which is easy to hang on a display hook.
Proudly made in the USA
|
|
|
|
|
Two Full Face helmets locked thru face with Bolt
Lock
|
|
|
|
Bolt Lock mounted on a GL1800 Goldwing with
six-foot cable
|
|
|
|
Bolt Lock keeps your jacket and helmet right where
you leave them. |
|
|
|
